How Does Solar Power Work?  Solar power gives you the ability take your RV off the grid while still using your refrigerator, lights and other appliances for extended periods. It’s cost-effective, environmentally and requires little maintenance — but how does it work? The Short Version… A solar panel is made up of individual solar cells

Installing your Go Power! Solar Charging Kit   It’s easy — everything you need to install your system is included in the Go Power! Solar Kit. If you’re a do-it-yourself type, all you need are basic tools. Alternatively, a certified Go Power! dealer will complete your installation quickly and professionally. Below are the four easy

What is an inverter? An inverter takes 12-volt DC power from your RV batteries or solar system and converts it to 120-volt AC to power your standard appliances. The inverter also acts as a battery charger if you’re plugged into an electrical source or using a generator.   Modified Sine Wave versus Pure Sine Wave

IC Series Inverter Charger Not Turning Off When Connected Does your inverter charger not appear to be turning off properly when connected to shore power? Sean explains why this happens and what to do about it. Click here for the video:

How to wire an Inverter Charger in an RV Is there a “right” way to wire your IC Series inverter charger? In this video Sean demonstrates how to safely connect your charger and talks about why checking those connections on a regular basis helps prevent potential performance issues. Click here for the video:

Installing the Temp Sensor With Your IC Series Inverter Charger Your battery temperature sensor is an important safety feature, and easy to install and connect with your inverter charger. Sean shows you how here. Watch the video:

Go Power! Industrial Pure Sine Wave Inverters 1Model Output (watts) Surge (watts) Dimensions (inches) Weight (lbs) Outlets DC Connect / Fuse Kit (12 V) Remote Options UL Cert. GP-ISW700 700 1230 13.0 x 7.9 x 3.3 5.7 2 GFCI GP-DC-KIT2 GP-ISW-R / GP-SWR-A Yes GP-ISW1000 1000 1750 14.7 x 7.9 x 3.3 7.2 2 GFCI

Neutral to Ground Bonding Not exactly sure what ‘neutral to ground bonding’ is, and how it impacts your Go Power! installation? Sean walks you through everything you need to know in this short video. Click here for the video:

Installing a Go Power! Inverter Go Power! offers three easy ways to install your new power inverter. Make sure you read through your user manual before tackling your inverter installation. Option 1: Plug & Power Plug & Power is the easiest way to install Go Power! Inverters. Your inverter should be located close to the

Proper Start-up of an Inverter Charger Is this thing on?! Have you installed and configured your IC Series inverter charger and now you’re ready to start it up? Sean walks you through the proper start-up procedure using the ICR-50 remote and touches on a few ‘dos and don’ts’. Watch the video: